What does it mean?
P3000 is a Powertrain fault code. It indicates: Fuel level is too low, High voltage battery assembly failure, High voltage battery is not sufficiently charged.
Fuel level is too low, High voltage battery assembly failure, High voltage battery is not sufficiently charged
Severity
Medium
Can I keep driving?
Usually drivable, but get it diagnosed without delay.
How is this code read?
This is a standard OBD-II code; any basic scanner reads it on vehicles built after 2004.
- PPowertrain
- 3Manufacturer-specific
- 0Powertrain (Other)
- 00Sequence number
Codes From the Same System
All Fault Codes- P0E00Generator Phase U Current Sensor Circuit
- P0E01Generator Phase U Current Sensor Circuit Range/Performance
- P0E02Generator Phase U Current Sensor Circuit Low
- P0E03Generator Phase U Current Sensor Circuit High
- P0E04Generator Phase V Current Sensor Circuit
- P0E05Generator Phase V Current Sensor Circuit Range/Performance
- P0E06Generator Phase V Current Sensor Circuit Low
- P0E07Generator Phase V Current Sensor Circuit High
Related Similar Codes
- P3001Auxiliary Transmission Speed Control Error
- P3002Kickdown Switch Implausible
- P3003Preheating Circuit
- P3004Preheating Circuit Open Circuit or Short to Ground
- P3005Preheating Circuit
- P3006Preheating Circuit Open Circuit or Short to Ground
- P3007Camshaft Position Sensor No Signal
- P3008Camshaft Position Sensor Out of Range
This information follows the generic OBD-II definition and does not replace a vehicle-specific diagnosis. The severity rating is rule-based; an authorised diagnostic reading is required for a definitive answer.