Autel • Scania 16 Pin Adapter
Autel Scania 16-Pin Round to 16-Pin OBD2 Heavy-Duty Diagnostic Adapter Socket (Scania-16 for Series 4 Trucks)
Autel Scania 16-Pin Round to 16-Pin OBD2 Heavy-Duty Diagnostic Adapter Socket (Scania-16 for Series 4 Trucks)
- Scania 16 Pin Adapter
- Autel
Engineered for Professional Workshop Demands
The Scania 16 Pin Adapter is built to deliver speed, accuracy, and stability in busy service bays.
Full Scania-16 Multiplexer Pinout
Connects every individual Scania K-Line and CAN channel so your Autel VCI can switch seamlessly between all chassis modules.
Complete EDC, Opticruise, Retarder & EBS Access
Reads and clears fault codes, runs injector tests, and calibrates air suspension (ELC) on Scania 4-Series vehicles.
Cable-Free Monoblock Durability
Solid one-piece industrial housing eliminates internal wire fatigue and crushed cables in truck cabs.
Direct Wireless VCI Attachment
Snap your 24V Autel Bluetooth VCI directly onto the rear 16-pin OBD2 socket for clutter-free cab diagnostics.
ARCHITECTURE
Full Scania-16 Multiplexer Pinout
Connects every individual Scania K-Line and CAN channel so your Autel VCI can switch seamlessly between all chassis modules.
- Adapter Model: Autel Scania-16 (16-Pin Round to 16-Pin OBD2 Heavy-Duty Adapter Socket)
- Vehicle Side Connector: Scania 16-Pin Circular Diagnostic Plug
- Scanner Side Connector: SAE J1962F 16-Pin Standard Female OBD2 Port
- Supported Protocols: Scania Multi-Channel K-Line (KW2000) & CAN-Bus
DIAGNOSTICS
Complete EDC, Opticruise, Retarder & EBS Access
Reads and clears fault codes, runs injector tests, and calibrates air suspension (ELC) on Scania 4-Series vehicles.
- Housing Design: One-Piece Molded Industrial ABS / PA66 (Autel Red / Black)
- Operating Voltage: 24V DC Heavy-Duty Commercial Systems
- Contact Plating: Corrosion-Resistant Gold-Plated Contacts
- VCI Compatibility: Autel MaxiSys CV Main Cables & 24V Wireless Bluetooth VCIs
COMPATIBILITY
Cable-Free Monoblock Durability
Solid one-piece industrial housing eliminates internal wire fatigue and crushed cables in truck cabs.
Detailed Visual & Technical Showcase
Close-up details and application views of the Scania 16 Pin Adapter.
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Adapter Model | Autel Scania-16 (16-Pin Round to 16-Pin OBD2 Heavy-Duty Adapter Socket) |
|---|---|
| Vehicle Side Connector | Scania 16-Pin Circular Diagnostic Plug |
| Scanner Side Connector | SAE J1962F 16-Pin Standard Female OBD2 Port |
| Supported Protocols | Scania Multi-Channel K-Line (KW2000) & CAN-Bus |
| Housing Design | One-Piece Molded Industrial ABS / PA66 (Autel Red / Black) |
|---|---|
| Operating Voltage | 24V DC Heavy-Duty Commercial Systems |
| Contact Plating | Corrosion-Resistant Gold-Plated Contacts |
| VCI Compatibility | Autel MaxiSys CV Main Cables & 24V Wireless Bluetooth VCIs |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
6 Months Otoeko Warranty Official Otoeko Warranty
The Scania 16 Pin Adapter is backed by a 6 Months Otoeko Warranty official Otoeko warranty against manufacturing defects, with full technical support.
Frequently Asked Questions
Key technical questions from technicians and workshops about the Scania 16 Pin Adapter.
Which Scania trucks use this 16-pin round adapter?
Scania 4-Series trucks (94, 114, 124, 144, 164) produced between 1995 and 2004, as well as Scania buses and industrial engines equipped with the circular 16-pin diagnostic socket.
Can I plug my Autel Bluetooth VCI directly into the back of this socket?
Yes! The rear features a standard 16-pin female OBD2 receptacle that holds wireless VCIs or wired main cables directly.
Will it communicate with Retarder, EBS, and Air Suspension (ELC) as well as the Engine?
Yes, all Scania K-Line multiplexer pins are fully wired so you can diagnose every module on the vehicle.
Is the Scania-16 round socket the same as the DAF-16 round socket?
Although the outer circular shells look very similar, their internal pin assignments differ. Always use this "SCANIA-16" socket on Scania trucks and the "DAF-16" socket (SKU OTO0289) on DAF trucks.
Does it fit into the original slot inside the Autel MaxiSys CV case?
Yes, it is molded to the exact dimensions of the original Autel Scania-16 adapter.
Can I use it with other 24V truck scanners?
Yes, any 24V-rated 16-pin OBD2 commercial truck scanner can connect through this adapter.