TURNKEY READY SET · WORKSTATION LAPTOP + PRE-INSTALLED ACTIVE SOFTWARE
Caterpillar CAT ET 4 Heavy Equipment Diagnostic Interface + Pre-Configured Laptop Turnkey Set
Skip hours of complex software setup; connect immediately with our pre-paired VCI and SSD Pre-Configured Business Workstation Laptop running CAT Electronic Technician (CAT ET).
- Workstation Laptop Included
- CAT Electronic Technician (C Active
- Plug & Play Delivery
- 6M VCI / 3M PC Warranty
Engineered for Professional Workshop Demands
The CAT ET 4 + Laptop Hazır Set is built to deliver speed, accuracy, and stability in busy service bays.
Simultaneous CDL & Dual J1939 Communication
Monitors Caterpillar's proprietary CDL bus alongside high-speed Dual J1939 CAN channels to read engine, hydraulic, and transmission ECMs without bottlenecks.
High-Speed WinFlash ECM Reprogramming
Optimized internal buffer accelerates Flash File (.fls) uploads and parameter configurations across ADEM III, ADEM IV, A4, and A5 ECMs.
Injector Trim Coding & Cylinder Cutout
Programs injector e-Trim codes and .trm files on C7, C9, C13, C15, C18, and C32 ACERT engines while executing automated cylinder cutout tests.
Rugged Jobsite Construction
Impact-resistant housing with locking connectors withstands dust, vibration, and 12V/24V field conditions.
ENGINE & FUEL SYSTEM DIAGNOSTICS
ACERT Engines, HEUI/MEUI/CR Injectors & Aftertreatment Control
Covers legacy 3400/3500 series through modern C4.4, C7.1, C9.3, C13, C15, C18, and C32 Tier 4 Final / Stage V engines:
- Reads and clears Active and Logged CID-FMI / EID event codes with logged machine hours
- Programs injector e-Trim codes and .trm calibration files after injector replacement
- Runs automated multi-cylinder cutout and solenoid click tests
- Executes ARD combustion head tests, DPF soot resets, and DEF dosing tests
HYDRAULICS, POWERTRAIN & CONFIGURATION
Excavator PRV Calibration, Powershift Clutch Fill & Parameter Setup
Full access to machine control modules on 320–390 excavators, 950–988 wheel loaders, dozers, and graders:
- Main hydraulic pump proportional reducing valve (PRV) and attachment flow calibration
- Powershift transmission clutch fill and torque converter calibration
- Machine speed limit, idle shutdown timer, and auxiliary hydraulic flow programming
- Real-time Data Logger and multi-channel graphing for pressure and temperature analysis
FIELD CONNECTIVITY KIT
Combined 9-Pin + 14-Pin Heavy-Duty Y-Cable for Universal CAT Access
Eliminates adapter swapping across mixed Caterpillar fleets:
- Combined Y-cable featuring both 9-Pin Deutsch and 14-Pin round CAT diagnostic connectors
- Locking USB cable for rock-solid PC communication in high-vibration cabins
- Direct operation on 12V and 24V equipment electrical systems
- Custom foam-lined hard carrying case
Detailed Visual & Technical Showcase
Close-up details and application views of the CAT ET 4 + Laptop Hazır Set.
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Hardware Model | Caterpillar Comm Adapter 4 (CAT ET 4) |
|---|---|
| Reference P/N | 478-0235 / 538-5051 |
| Compatible Software | CAT Electronic Technician (CAT ET) & WinFlash |
| Supported Protocols | CAT Data Link (CDL), Dual SAE J1939 CAN, SAE J1708/J1587 |
| PC Interface | High-Speed Locking USB 2.0 |
| Machine Connector | Combined 9-Pin Deutsch + 14-Pin CAT Y-Cable |
| Operating Voltage | 9V – 32V DC (12V & 24V Systems) |
|---|---|
| OS Compatibility | Windows 10 & Windows 11 (64-Bit) |
| Equipment Coverage | Excavators, Loaders, Dozers, Graders, Trucks, Generators, Marine |
| Status Indicators | Power, USB & Data Link Activity LEDs |
| Origin | China (Industrial Grade A+ PCB) |
| Warranty | 6-Month Official Otoeko Warranty |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Connect to Machine Diagnostic Port
Attach either the 9-Pin or 14-Pin connector of the Y-cable to the CAT service port inside the cab.
Connect USB & Turn Key ON
Plug the USB cable into your laptop, switch the machine key to ON, and verify the power LED on the Comm Adapter 4.
Auto-Detect ECMs in CAT ET
Launch CAT Electronic Technician; the interface automatically detects all Engine, Hydraulic, and Transmission ECMs.
Diagnose, Calibrate & WinFlash
Review active/logged fault codes, perform cylinder cutout or PRV calibration, or flash ECM firmware via WinFlash.
Technical Capabilities & Operational Advantages
Key engineering advantages for professional workshop diagnostics.
Core Workshop Requirements
- Reads only generic J1939; cannot access Caterpillar's proprietary CDL (CAT Data Link) bus.
- Cannot upload injector .trm trim files or perform WinFlash ECM programming.
- Lacks excavator hydraulic pump PRV and Powershift transmission calibrations.
- Cannot connect directly to modern 14-Pin CAT equipment ports.
With CAT ET 4 + Laptop Hazır Set
- Full CDL + Dual J1939 + J1708 support across all Caterpillar ECMs.
- Programs injector Trim files, configures parameters, and flashes ECMs via WinFlash.
- Executes dealer-level hydraulic PRV, transmission clutch, and DPF service routines.
- Includes combined 9-Pin + 14-Pin heavy-duty Y-cable for all CAT equipment.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Pre-Configured Business Workstation Laptop (with CAT Electronic Technician (CAT ET) Pre-Installed, Active & Configured)
- 1 × Original AC Power Adapter & Charging Cord
- 1 × Caterpillar CAT Comm Adapter 4 (ET4 · 478-0235) Main Unit
- 1 × Combined 9-Pin + 14-Pin Heavy-Duty Machine Y-Cable
- 1 × Locking USB PC Cable
- 1 × Heavy-Duty Field Carrying Case (Note: Software not included, sold separately)
6-Month VCI & 3-Month Second-Hand PC Warranty
In the CAT ET 4 + Laptop Hazır Set turnkey bundle, the VCI diagnostic interface is backed by a 6-month warranty against manufacturing defects, and the included second-hand laptop/tablet carries a 3-month Otoeko warranty (Laptop images are representative).
Frequently Asked Questions
Key technical questions from technicians and workshops about the CAT ET 4 + Laptop Hazır Set.
What is the difference between CAT ET 4 and CAT ET 3?
CAT ET 4 (478-0235) features a faster processor and Dual J1939 CAN + CDL architecture for significantly faster ECM scanning and WinFlash programming on newer CAT machines.
Which Caterpillar machines and engines are supported?
Supports all CAT excavators, loaders, dozers, graders, articulated/mining trucks, industrial generators, and marine engines.
Which diagnostic cables are included?
Includes a combined heavy-duty Y-cable with both 9-Pin and 14-Pin round CAT connectors plus a USB cable.
Does it support Injector Trim coding and WinFlash?
Yes, it fully supports injector .trm file calibration and WinFlash ECM reprogramming via CAT ET.
Is CAT ET software included?
This package includes the CAT ET 4 hardware and cables; software and turnkey laptop kits are available separately.
What is the warranty period?
Backed by a 6-month official Otoeko hardware warranty.