OEM-GRADE DIAGNOSTIC HARNESS · CLIP-DLC-RED-19P · FULL PINOUT
Renault & Dacia CAN Clip VCI 16-Pin OBD-II Main Diagnostic Cable (Red Connector)
Replace worn or intermittent cables on your Renault CAN Clip (RLT2002 / Sondage) VCI Arayüzü with a shielded, full-pin industrial harness built for reliable workshop diagnostics.
- CLIP-DLC-RED-19P
- Full-Pin Pure Copper
- Locking Connector
- 100% Continuity Tested
Engineered for Professional Workshop Demands
The Renault CAN Clip OBD2 Ana Kablosu (Kırmızı Soket) is built to deliver speed, accuracy, and stability in busy service bays.
Authentic 1:1 OEM Full Pinout
Unlike budget cables with missing wires, every data, ignition sense, and power pin required for Dual High/Low Speed CAN-Bus · ISO 9141 K-Line · L-Line is fully populated.
EMI/RFI Shielded Pure Copper Conductors
Multi-strand oxygen-free copper with foil shielding blocks electromagnetic interference during high-speed CAN and USB communication.
Locking Connectors with Strain Relief
Moulded strain-relief collars on both the 19-Pin Yuvarlak Metal Kilitli Havacılık Konnektörü (Kırmızı Başlık) and 16-Pin J1962 OBD-II Erkek Soket ends prevent internal wire fatigue.
Safe ECU Flashing & Calibration
Maintains rock-solid voltage and signal integrity during programming sessions in Renault CAN Clip Tüm Sürümler.
UNINTERRUPTED DIAGNOSTIC LINK
Essential Replacement Harness for Renault CAN Clip (RLT2002 / Sondage) VCI Arayüzü
Over 80% of 'VCI Not Found' or 'Communication Error' faults are caused by damaged cables. Upgrading to this OEM-spec harness delivers:
- Instant, stable connection to all ECUs across Renault ve Dacia Binek & Hafif Ticari Araçlar (Clio, Megane, Fluence, Master, Duster)
- VCI-side termination: 19-Pin Yuvarlak Metal Kilitli Havacılık Konnektörü (Kırmızı Başlık)
- Vehicle / PC termination: 16-Pin J1962 OBD-II Erkek Soket
- Full protocol pass-through: Dual High/Low Speed CAN-Bus · ISO 9141 K-Line · L-Line
WORKSHOP DURABILITY
Oil, Heat & Crush Resistant Industrial Jacket
Built to survive daily plug-in cycles on the workshop floor:
- Gold/nickel-plated terminal pins resist oxidation and contact wear
- High-flexibility elastomer jacket remains supple in cold weather
- Reference part specification: CLIP-DLC-RED-19P
- 100% pin-to-pin continuity tested prior to dispatch
ARCHITECTURE & SYSTEM COMPATIBILITY
Renault CAN Clip OBD2 Ana Kablosu (Kırmızı Soket) Software, Protocol & ECU Coverage
Hardware and operating parameters engineered for uninterrupted dealer-level communication:
- Full Pinout: Matches CLIP-DLC-RED-19P OEM wiring specification
- Locking Fit: Vibration-resistant connectors prevent dropouts
- Pure Copper: High-speed CAN/DoIP/USB transmission without packet loss
- Renault CAN Clip (RLT2002 / Sondage) VCI Arayüzü
Detailed Visual & Technical Showcase
Close-up details and application views of the Renault CAN Clip OBD2 Ana Kablosu (Kırmızı Soket).
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Product Model | Renault & Dacia CAN Clip VCI 16-Pin OBD-II Main Diagnostic Cable (Red Connector) |
|---|---|
| Reference Part No | CLIP-DLC-RED-19P |
| Compatible VCI Unit | Renault CAN Clip (RLT2002 / Sondage) VCI Arayüzü |
| Compatible Software | Renault CAN Clip Tüm Sürümler |
| VCI Side Connector | 19-Pin Yuvarlak Metal Kilitli Havacılık Konnektörü (Kırmızı Başlık) |
| Vehicle / PC Connector | 16-Pin J1962 OBD-II Erkek Soket |
|---|---|
| Supported Protocols | Dual High/Low Speed CAN-Bus · ISO 9141 K-Line · L-Line |
| Vehicle / Equipment Range | Renault ve Dacia Binek & Hafif Ticari Araçlar (Clio, Megane, Fluence, Master, Duster) |
| Quality & Warranty | No Warranty on Consumable Cables (100% Tested Before Dispatch) |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Inspect Connector Pins
Verify both sockets are clean and free of bent pins or debris before connecting.
Lock VCI Connector
Seat the 19-Pin Yuvarlak Metal Kilitli Havacılık Konnektörü (Kırmızı Başlık) firmly onto your VCI unit and tighten any locking screws.
Attach Vehicle / PC Plug
Connect the 16-Pin J1962 OBD-II Erkek Soket and confirm the VCI power/status LEDs illuminate.
Disconnect by Connector Body
Always grasp the moulded connector body rather than pulling on the cable jacket.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Renault & Dacia CAN Clip VCI 16-Pin OBD-II Main Diagnostic Cable (Red Connector) (CLIP-DLC-RED-19P)
- 1 × Protective Anti-Static Bag (100% Continuity Tested)
100% Pin Continuity & Quality Control Assurance
Every Renault CAN Clip OBD2 Ana Kablosu (Kırmızı Soket) harness is 100% continuity- and isolation-tested on the Otoeko test bench prior to dispatch (Consumable cables carry no warranty against physical wear or strain).
Frequently Asked Questions
Key technical questions from technicians and workshops about the Renault CAN Clip OBD2 Ana Kablosu (Kırmızı Soket).
Which diagnostic interface does this cable fit?
It is specifically engineered for Renault CAN Clip (RLT2002 / Sondage) VCI Arayüzü.
Are all internal pins populated?
Yes, it features a complete 1:1 OEM pinout supporting Dual High/Low Speed CAN-Bus · ISO 9141 K-Line · L-Line.
Will this fix intermittent connection drops?
Yes, if your existing cable has internal wire fatigue or loose pins, replacing it restores stable VCI communication.
Is it safe for ECU programming?
Yes, the shielded pure copper conductors and locking connectors ensure uninterrupted data transfer.
Which vehicles are supported?
Supports Renault ve Dacia Binek & Hafif Ticari Araçlar (Clio, Megane, Fluence, Master, Duster).
What is the warranty policy on cables?
Diagnostic cables are consumable workshop items and carry no warranty against physical wear, but every unit is 100% continuity-tested prior to shipping.