GENUINE DEUTZ DECOM · SERDIA 2010 / 4.0 · EMR2 / EMR3 / EMR4 / EMR5
Genuine Deutz DeCom (SerDia) Engine Diagnostic VCI + USB Dongle Kit
Combining the authentic German Deutz DeCom interface with a high-level USB security dongle, this kit unlocks advanced calibration, PRV resets, and parameter programming across all Deutz EMR controllers.
- Genuine Deutz DeCom VCI
- High-Level USB Security Dongle
- EMR2 / EMR3 / EMR4 / EMR5
- 6-Month Otoeko Warranty
Engineered for Professional Workshop Demands
The Deutz DeCom (SerDia 2010 / 4.0 Orijinal Arayüz + Seviye Dongle Seti) is built to deliver speed, accuracy, and stability in busy service bays.
Genuine DeCom VCI + High-Level USB Dongle
Communicates across both legacy K-Line (EMR2/EMR3) and dual CAN-Bus (EMR4/EMR5) while the USB dongle unlocks write/calibration permissions inside SerDia.
PRV Rail Valve Reset & Injector Coding
Resets the fuel rail Pressure Relief Valve (PRV) open counter to clear limp-home torque derates on TCD 2.9, 3.6, 4.1, 6.1, and 7.8 engines, and codes IMA injectors.
DPF Regeneration & SCR/AdBlue Service
Runs standstill DPF regenerations, ash resets, and SCR/NOx dosing tests on Tier 4 and Stage V engines.
ECU Dataset & Parameter Programming
Configures speed limits, sensor assignments, and machine-specific parameters after EMR replacement.
SUPPORTED DEUTZ ENGINE CONTROLLERS (EMR)
Full Authority Across EMR2, EMR3, EMR4 & Stage V EMR5
Covers the complete Deutz electronic engine portfolio:
- EMR2 and LDEC (K-Line protocol on 1012, 1013, 2012, 2013 series engines)
- EMR3 / Bosch EDC16UC40 & EDC7UC31 (TCD 2012, TCD 2013, TCD 2015 engines)
- EMR4 / Bosch EDC17CV52, EDC17CV54 & EDC17CV56 (TCD 2.9, 3.6, 4.1, 6.1, 7.8)
- EMR5 / Bosch MD1CE100 (Latest Stage V agricultural and construction engines)
MULTI-BRAND EQUIPMENT COVERAGE
One Diagnostic Kit for Dozens of Global OEMs Using Deutz Power
Directly diagnoses the Deutz engine and aftertreatment on:
- Agriculture: Deutz-Fahr, Fendt, Same, Lamborghini, and Hürlimann tractors
- Road & Construction: Wirtgen, Vögele, Hamm, Bomag, Liebherr, Atlas, Sennebogen
- Material Handling: Volvo CE, Manitou, Merlo, Genie, JLG, and Haulotte
- Power Gen & Compressors: Atlas Copco, Kaeser, and industrial Deutz generator sets
COMPLETE FIELD HARNESS PACKAGE
Includes Both 12-Pin Round Deutz Cable & 16-Pin OBD2 Cable
Ready for immediate connection in the workshop or jobsite:
- Genuine Deutz DeCom VCI (2× High-Speed CAN + 2× K/L-Line + J1708)
- High-level USB Hardware Security Dongle for SerDia
- 12-Pin round Deutz engine diagnostic cable and 16-Pin OBD2 cable
- Heavy-duty carrying case backed by a 6-month official Otoeko warranty
Detailed Visual & Technical Showcase
Close-up details and application views of the Deutz DeCom (SerDia 2010 / 4.0 Orijinal Arayüz + Seviye Dongle Seti).
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Hardware Model | Genuine Deutz DeCom + USB Security Dongle |
|---|---|
| Compatible Software | Deutz SerDia 2010 & SerDia 4.0 |
| Supported ECUs | MVS, EMR1, EMR2, LDEC, EMR3 (EDC16/EDC7), EMR4 (EDC17), EMR5 (MD1) |
| Supported Protocols | 2× CAN (J1939 / CANopen / ISO 15765), 2× K/L-Line, J1708 |
| Authorization Key | High-Level Engineering/Service USB Hardware Dongle |
| Machine Connectors | 12-Pin Round Deutz Cable + 16-Pin OBD2 Cable |
| PC Interface | High-Speed USB 2.0 |
|---|---|
| Operating Voltage | 8V – 32V DC (12V & 24V Systems) |
| OS Compatibility | Windows 10 & Windows 11 (64-Bit) |
| Origin | Germany (Genuine DeCom Hardware) |
| Warranty | 6-Month Official Otoeko Warranty |
| Package Type | Genuine DeCom VCI + USB Dongle + Cable Kit |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Insert USB Security Dongle
Plug the included USB hardware security dongle into your laptop.
Connect DeCom to Engine
Attach the 12-Pin round Deutz cable or 16-Pin OBD2 cable to the machine diagnostic port and link DeCom via USB.
Auto-Identify EMR in SerDia
Launch SerDia; the software automatically identifies the connected EMR2/3/4/5 controller.
Reset PRV, Code & Program
Reset PRV counters, code IMA injectors, run DPF regeneration, or write ECU parameters.
Technical Capabilities & Operational Advantages
Key engineering advantages for professional workshop diagnostics.
Core Workshop Requirements
- Interfaces without a USB security dongle cannot access PRV resets, DPF regeneration, or parameter writing.
- Standard CAN adapters cannot connect to K-Line EMR2 and EMR3 engines.
- Generic scanners misinterpret Deutz-specific SPN/FMI fault codes.
- Cannot configure replacement EMR controllers.
With Deutz DeCom (SerDia 2010 / 4.0 Orijinal Arayüz + Seviye Dongle Seti)
- Genuine DeCom VCI + USB Security Dongle unlocks full calibration and write access in SerDia.
- Supports both K-Line (EMR2/EMR3) and dual-CAN (EMR4/EMR5) controllers.
- Performs factory PRV rail valve resets, injector coding, and DPF/SCR regenerations.
- Includes both 12-Pin round Deutz and 16-Pin OBD2 cables.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Genuine Deutz DeCom (Diagnostic Communicator) Main Interface
- 1 × High-Level SerDia USB Security Dongle
- 1 × 12-Pin Round Deutz Engine Diagnostic Cable
- 1 × 16-Pin OBD2 Main Cable & USB PC Cable
- 1 × Heavy-Duty Carrying Case
6 Months Official Otoeko Warranty
The Deutz DeCom (SerDia 2010 / 4.0 Orijinal Arayüz + Seviye Dongle Seti) is backed by a 6 Months official Otoeko warranty against manufacturing defects, with full technical support.
Frequently Asked Questions
Key technical questions from technicians and workshops about the Deutz DeCom (SerDia 2010 / 4.0 Orijinal Arayüz + Seviye Dongle Seti).
What does the included USB Dongle do?
Deutz SerDia restricts calibration and programming menus based on the connected USB hardware dongle. The included high-level dongle unlocks PRV resets, injector coding, DPF/SCR regeneration, and parameter writing.
Which Deutz ECUs are supported?
Supports EMR1, EMR2, LDEC, EMR3 (EDC16/EDC7), EMR4 (EDC17CV52/54/56), and Stage V EMR5 (MD1).
Does it work on Fendt, Deutz-Fahr, Volvo CE, Wirtgen, and Manitou?
Yes, it works on all tractors, excavators, rollers, pavers, telehandlers, compressors, and generators powered by Deutz engines.
Can it reset the PRV (Pressure Relief Valve) counter?
Yes, it resets the fuel rail PRV open count and duration to clear limp-home derates.
Is the 12-Pin round Deutz cable included?
Yes, both the 12-Pin round Deutz cable and the 16-Pin OBD2 cable are included.
What is the warranty period?
Backed by a 6-month official Otoeko hardware warranty.