FORD WIRED DIAGNOSTIC SOLUTION · PIC18F25K80 · HS-CAN / MS-CAN SWITCHED USB
Ford FORScan USB Wired Diagnostic & Fault Code Interface (HS-CAN / MS-CAN Switched PIC18F25K80)
Perform deep electronic system analysis on your Ford vehicle from a Windows PC using a rock-solid USB connection, genuine PIC18F25K80 chip, and HS-CAN/MS-CAN bus switch.
- PIC18F25K80 Chip
- HS-CAN / MS-CAN Switch
- Stable USB Wired
- FORScan Windows Ready
Engineered for Professional Workshop Demands
The Ford FORScan USB Arıza Tespit (HS/MS-CAN PIC18F25K80) is built to deliver speed, accuracy, and stability in busy service bays.
Complete Module Scanning via HS-CAN / MS-CAN Switch
While generic cables only see the engine ECU, our modified HS-CAN / MS-CAN switch lets you scan both the high-speed powertrain bus and the medium-speed body/comfort bus across Ford vehicles.
Genuine Microchip PIC18F25K80 Processor Power
Reads control modules without timeout errors, displays Ford-specific DTC sub-code descriptions, and clears fault memory with a single click.
Uninterrupted Wired USB Connection for Service Procedures
The physical USB 2.0 cable prevents disconnections during extended procedures such as DPF static regeneration, injector coding, or road-test data logging.
Multi-Language FORScan Software & Continuous Updates
Works seamlessly with regularly updated FORScan for Windows software, ideal for both individual Ford owners and professional repair workshops.
COMPREHENSIVE DIAGNOSTICS & SERVICE FUNCTIONS
Manage All Electronic Systems on Your Ford from a Windows PC
Delivers dealer-level diagnostic depth and workshop service procedures:
- Wide Fault Scanning & Clearing: Read and clear DTCs in Engine (PCM), Transmission (TCM), ABS/ESP, Power Steering (PSCM), Airbag (RCM), Body Control (BCM), Cluster (IPC), HVAC, and Audio/SYNC
- Live Data & Oscilloscope: Plot injector correction values, Common Rail fuel pressure, DPF soot load and differential pressure, MAF/MAP airflow, and temperature sensors
- Service & Calibration Procedures: Reset oil service indicators, run DPF static regeneration, reset the Battery Monitoring System (BMS), and code TDCi injectors on supported models
- Module Self-Tests (KOEO / KOER): Run Key-On Engine-Off (KOEO) and Key-On Engine-Running (KOER) on-demand module tests
SUPPORTED FORD VEHICLES
Broad Model Coverage Across Ford Passenger & Commercial Lines
Supports both legacy and modern CAN-Bus Ford models via continuously updated FORScan databases:
- Ford Passenger Cars: Focus (Mk2, Mk2.5, Mk3, Mk3.5, Mk4), Fiesta (Mk6, Mk7, Mk7.5, Mk8), Mondeo (Mk4, Mk5), Kuga, C-Max, B-Max, S-Max, Galaxy, EcoSport, Fusion
- Ford Commercial Vehicles: Tourneo Courier / Transit Courier, Tourneo Connect / Transit Connect, Tourneo Custom / Transit Custom, Transit, and Ranger
- Additional Coverage: Compatible with supported Mazda and Lincoln models
SOFTWARE, LICENSE & PLATFORM NOTICE
FORScan Software Access & Windows OS Support
Key software and platform details before purchase:
- Windows OS Compatibility: Works across Windows 7, 8, 10, and 11 (32/64-Bit). Our company provides software links and technical support exclusively for Windows operating systems; mobile apps are not supported.
- Software Download: Download FORScan from the official website (forscan.org) or via our Order Status Inquiry page using your order code.
- FORScan License Information: Our company sells the diagnostic hardware designed for FORScan. Fault reading, clearing, live data, and standard service procedures are free in FORScan for Windows; advanced coding functions may require a free 2-month Extended License from forscan.org.
Detailed Visual & Technical Showcase
Close-up details and application views of the Ford FORScan USB Arıza Tespit (HS/MS-CAN PIC18F25K80).
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| SKU | OTO0071 |
|---|---|
| Product Name | Ford FORScan USB Wired Diagnostic Interface |
| Microcontroller Chip | Genuine Microchip PIC18F25K80 |
| Hardware Modification | HS-CAN / MS-CAN Toggle Switch |
| Connection Interface | High-Speed USB 2.0 Wired |
| OBD Connector | 16-Pin Standard J1962 OBD-II Plug |
| Power Supply | 12V DC via Vehicle OBD2 Port |
| Compatible Software | FORScan for Windows (Multi-Language) |
|---|---|
| Supported OS | Windows 7 / 8 / 10 / 11 (32-Bit & 64-Bit) |
| Mobile Platform Support | None (For Windows PC Use Only) |
| Core Functions | DTC Read/Clear, Live Data, Service & Adaptation |
| Software Access | Order Status Inquiry page or forscan.org |
| Warranty | 6-Month Official Otoeko Hardware Warranty |
| Quality Inspection | PIC18F25K80 & switch tested before shipping |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Download & Install FORScan
Download the latest FORScan for Windows from your order inquiry page or forscan.org and install it on your PC.
Connect Hardware to Vehicle & PC
Plug the FORScan USB cable into your vehicle's OBD2 socket and your laptop's USB port, then turn the ignition on.
Connect to Vehicle in FORScan
Launch FORScan and click connect. Flip the HS/MS-CAN toggle switch when prompted on screen to scan medium-speed modules.
Diagnose Faults & Monitor Live Data
Review and clear DTC fault codes, turn off dashboard warning lamps, and monitor live sensor parameters.
Technical Capabilities & Operational Advantages
Key engineering advantages for professional workshop diagnostics.
Core Workshop Requirements
- Non-switched OBD2 cables cannot read Ford body, cluster, or airbag modules
- Wireless adapters can drop connection during DPF regeneration or long road logs
- Fake v2.1 USB cables are rejected by FORScan
- Repeated workshop fees for simple fault reading and service resets
With Ford FORScan USB Arıza Tespit (HS/MS-CAN PIC18F25K80)
- HS-CAN / MS-CAN switch scans every control unit on your Ford vehicle
- Stable wired USB 2.0 connection guarantees zero dropouts during DPF regeneration and service tests
- Genuine Microchip PIC18F25K80 processor delivers fast DTC scanning and oscilloscope graphing
- Includes software download link, setup support, and 6-month Otoeko hardware warranty
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Ford FORScan USB Wired Diagnostic Interface (PIC18F25K80 & HS-CAN / MS-CAN Switched)
- Digital Access: Windows FORScan Software Download Link (via Order Inquiry Page)
- Otoeko Quality Control Approval & Official Invoice (6-Month Warranty)
6 Months Official Otoeko Warranty
The Ford FORScan USB Arıza Tespit (HS/MS-CAN PIC18F25K80) is backed by a 6 Months official Otoeko warranty against manufacturing defects, with full technical support.
Frequently Asked Questions
Key technical questions from technicians and workshops about the Ford FORScan USB Arıza Tespit (HS/MS-CAN PIC18F25K80).
Which modules can the FORScan USB diagnostic cable access?
Thanks to the HS-CAN / MS-CAN switch and PIC18F25K80 chip, it connects to Engine, Transmission, ABS, ESP, Airbag, Body Control (BCM), Instrument Cluster (IPC), HVAC, and Audio/SYNC modules.
Which Windows versions are supported?
Fully compatible with Windows 7, Windows 8, Windows 10, and Windows 11 (both 32-Bit and 64-Bit).
Is a paid license required for reading and clearing fault codes?
No. Reading/clearing fault codes, live data streaming, and service tests are included in the free standard version of FORScan for Windows.
Can it perform DPF regeneration and injector coding on diesel Fords?
Yes. Through FORScan's Service Procedures menu, you can run DPF static regeneration and input injector calibration codes on supported TDCi models.
Can this cable also unlock hidden features?
Yes, because it features the genuine PIC18F25K80 chip and HS/MS-CAN switch, you can also enable hidden features with a free 2-month Extended License from forscan.org.
Does it work with smartphones?
No, this is a wired USB model designed exclusively for Windows PCs.