OEM-GRADE DIAGNOSTIC HARNESS · ICOM-NEXT-LAN-CAT6 · FULL PINOUT
BMW ICOM NEXT A3 Diagnostic Interface High-Speed Shielded RJ45 Ethernet LAN Cable
Replace worn or intermittent cables on your BMW ICOM A · ICOM A2 · ICOM NEXT A3 with a shielded, full-pin industrial harness built for reliable workshop diagnostics.
- ICOM-NEXT-LAN-CAT6
- Full-Pin Pure Copper
- Locking Connector
- 100% Continuity Tested

Engineered for Professional Workshop Demands
The BMW ICOM NEXT A3 Ethernet (RJ45 DoIP) Kablosu is built to deliver speed, accuracy, and stability in busy service bays.

Authentic 1:1 OEM Full Pinout
Unlike budget cables with missing wires, every data, ignition sense, and power pin required for 100/1000 Base-T Ethernet · DoIP (ISO 13400) · TCP/IP Flash İletişimi is fully populated.
EMI/RFI Shielded Pure Copper Conductors
Multi-strand oxygen-free copper with foil shielding blocks electromagnetic interference during high-speed CAN and USB communication.
Locking Connectors with Strain Relief
Moulded strain-relief collars on both the Endüstriyel Korumalı RJ45 Gigabit LAN Konnektörü (Sarı Zırhlı) and PC / Router RJ45 Ethernet Portu (Yüksek Hızlı Veri Aktarımı) ends prevent internal wire fatigue.
Safe ECU Flashing & Calibration
Maintains rock-solid voltage and signal integrity during programming sessions in ISTA-D (Rheingold) · ISTA-P · E-Sys · WinKFP · INPA.

UNINTERRUPTED DIAGNOSTIC LINK
Essential Replacement Harness for BMW ICOM A · ICOM A2 · ICOM NEXT A3
Over 80% of 'VCI Not Found' or 'Communication Error' faults are caused by damaged cables. Upgrading to this OEM-spec harness delivers:
- Instant, stable connection to all ECUs across BMW E, F, G ve I Serisi, MINI ve Rolls-Royce (ECU Flashlama & Kodlama)
- VCI-side termination: Endüstriyel Korumalı RJ45 Gigabit LAN Konnektörü (Sarı Zırhlı)
- Vehicle / PC termination: PC / Router RJ45 Ethernet Portu (Yüksek Hızlı Veri Aktarımı)
- Full protocol pass-through: 100/1000 Base-T Ethernet · DoIP (ISO 13400) · TCP/IP Flash İletişimi

WORKSHOP DURABILITY
Oil, Heat & Crush Resistant Industrial Jacket
Built to survive daily plug-in cycles on the workshop floor:
- Gold/nickel-plated terminal pins resist oxidation and contact wear
- High-flexibility elastomer jacket remains supple in cold weather
- Reference part specification: ICOM-NEXT-LAN-CAT6
- 100% pin-to-pin continuity tested prior to dispatch

ARCHITECTURE & SYSTEM COMPATIBILITY
BMW ICOM NEXT A3 Ethernet (RJ45 DoIP) Kablosu Software, Protocol & ECU Coverage
Hardware and operating parameters engineered for uninterrupted dealer-level communication:
- Full Pinout: Matches ICOM-NEXT-LAN-CAT6 OEM wiring specification
- Locking Fit: Vibration-resistant connectors prevent dropouts
- Pure Copper: High-speed CAN/DoIP/USB transmission without packet loss
- BMW ICOM A · ICOM A2 · ICOM NEXT A3
Detailed Visual & Technical Showcase
Close-up details and application views of the BMW ICOM NEXT A3 Ethernet (RJ45 DoIP) Kablosu.
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Product Model | BMW ICOM NEXT A3 Diagnostic Interface High-Speed Shielded RJ45 Ethernet LAN Cable |
|---|---|
| Reference Part No | ICOM-NEXT-LAN-CAT6 |
| Compatible VCI Unit | BMW ICOM A · ICOM A2 · ICOM NEXT A3 |
| Compatible Software | ISTA-D (Rheingold) · ISTA-P · E-Sys · WinKFP · INPA |
| VCI Side Connector | Endüstriyel Korumalı RJ45 Gigabit LAN Konnektörü (Sarı Zırhlı) |
| Vehicle / PC Connector | PC / Router RJ45 Ethernet Portu (Yüksek Hızlı Veri Aktarımı) |
|---|---|
| Supported Protocols | 100/1000 Base-T Ethernet · DoIP (ISO 13400) · TCP/IP Flash İletişimi |
| Vehicle / Equipment Range | BMW E, F, G ve I Serisi, MINI ve Rolls-Royce (ECU Flashlama & Kodlama) |
| Quality & Warranty | No Warranty on Consumable Cables (100% Tested Before Dispatch) |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Inspect Connector Pins
Verify both sockets are clean and free of bent pins or debris before connecting.
Lock VCI Connector
Seat the Endüstriyel Korumalı RJ45 Gigabit LAN Konnektörü (Sarı Zırhlı) firmly onto your VCI unit and tighten any locking screws.
Attach Vehicle / PC Plug
Connect the PC / Router RJ45 Ethernet Portu (Yüksek Hızlı Veri Aktarımı) and confirm the VCI power/status LEDs illuminate.
Disconnect by Connector Body
Always grasp the moulded connector body rather than pulling on the cable jacket.

Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × BMW ICOM NEXT A3 Diagnostic Interface High-Speed Shielded RJ45 Ethernet LAN Cable (ICOM-NEXT-LAN-CAT6)
- 1 × Protective Anti-Static Bag (100% Continuity Tested)
100% Pin Continuity & Quality Control Assurance
Every BMW ICOM NEXT A3 Ethernet (RJ45 DoIP) Kablosu harness is 100% continuity- and isolation-tested on the Otoeko test bench prior to dispatch (Consumable cables carry no warranty against physical wear or strain).
Frequently Asked Questions
Key technical questions from technicians and workshops about the BMW ICOM NEXT A3 Ethernet (RJ45 DoIP) Kablosu.
Which diagnostic interface does this cable fit?
It is specifically engineered for BMW ICOM A · ICOM A2 · ICOM NEXT A3.
Are all internal pins populated?
Yes, it features a complete 1:1 OEM pinout supporting 100/1000 Base-T Ethernet · DoIP (ISO 13400) · TCP/IP Flash İletişimi.
Will this fix intermittent connection drops?
Yes, if your existing cable has internal wire fatigue or loose pins, replacing it restores stable VCI communication.
Is it safe for ECU programming?
Yes, the shielded pure copper conductors and locking connectors ensure uninterrupted data transfer.
Which vehicles are supported?
Supports BMW E, F, G ve I Serisi, MINI ve Rolls-Royce (ECU Flashlama & Kodlama).
What is the warranty policy on cables?
Diagnostic cables are consumable workshop items and carry no warranty against physical wear, but every unit is 100% continuity-tested prior to shipping.



