MERCEDES-BENZ XENTRY DIAGNOSIS VCI (C6) · DOIP · XENTRY / MONACO
Mercedes-Benz C6 (XENTRY Diagnosis VCI) Dealer Diagnostic & Coding Interface
Lighter, faster, and free of internal battery failures, the Mercedes-Benz XENTRY Diagnosis VCI (C6) combines native DoIP Ethernet, CAN-FD, and K-Line multiplexers for complete 12V and 24V Daimler coverage.
- True XENTRY VCI (C6) Architecture
- Built-In DoIP & CAN-FD
- XENTRY / DAS / DTS Monaco
- 6-Month Otoeko Warranty
Engineered for Professional Workshop Demands
The Mercedes-Benz XENTRY Diagnosis VCI (C6 · DoIP · Wi-Fi + USB) is built to deliver speed, accuracy, and stability in busy service bays.
Native DoIP (Diagnostics over IP) & CAN-FD
Communicates directly with MBUX infotainment, digital instrument clusters, and ADAS radars on W205, W206, W213, W214, W222, W223, and EQ models via the standard 16-Pin OBD2 cable.
DTS Monaco & Vediamo Engineering Coding
Supports offline variant coding, Start/Stop memory, AMG menu activation, Multibeam/Digital Light coding, and engineering flash routines.
7G-Tronic, 9G-Tronic & Engine Adaptations
Performs VGS/ISM/DSM transmission adaptations, torque converter lockup learning, OM651/OM654/OM656 injector IMA coding, and DPF regeneration.
Battery-Free Industrial Design
Powered directly via the vehicle OBD2 port or USB—no internal batteries to swell or LCD screens to crack.
PASSENGER CARS, AMG, MAYBACH & EQ ELECTRIC
Complete Authority Across A, B, C, E, S, GLC, GLE, GLS & G-Class
Covers classic K-Line/CAN chassis (W203, W204, W211, W212) through latest DoIP platforms (W206, W214, W223, EQS, EQE):
- XENTRY Quick Test, guided troubleshooting, and live actuator testing
- 722.9 (7G-Tronic) and 725.0 (9G-Tronic) standstill and drive adaptation
- Airmatic and Magic Body Control ride-height calibration
- Multibeam LED / Digital Light, 360° camera, and Distronic radar calibration
COMMERCIAL VANS, TRUCKS & BUSES (SPRINTER · ACTROS · TRAVEGO)
12V Light Commercials & 24V Heavy-Duty Daimler Fleets
Works with both XENTRY Passenger and XENTRY Truck / DAS:
- Sprinter (906, 907, 910), Vito/V-Class (W639, W447), and Citan DPF, EGR, and AdBlue/SCR service
- Actros (MP2–MP5), Arocs, Atego, and Unimog MCM/ACM engine and Powershift gearbox calibration
- Travego, Tourismo, Conecto, and Setra bus EBS, ECAS, and body electronics diagnostics
- BlueTec AdBlue starter inhibit / torque derate reset and NOx sensor tests
DUAL WI-FI & LOCKING USB CONNECTIVITY
Cordless Workshop Freedom + Rock-Solid USB Flashing
Built for professional Mercedes-Benz service bays:
- Internal high-gain Wi-Fi (WLAN) module for wireless diagnostics
- Locking high-speed USB 2.0 cable for stable DoIP flashing and DTS Monaco coding
- 26-Pin circular locking connector to 16-Pin OBD2 main harness
- Padded carrying case with a 6-month official Otoeko warranty
Detailed Visual & Technical Showcase
Close-up details and application views of the Mercedes-Benz XENTRY Diagnosis VCI (C6 · DoIP · Wi-Fi + USB).
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Hardware Model | Mercedes-Benz XENTRY Diagnosis VCI (C6) |
|---|---|
| Compatible Software | XENTRY, DAS, DTS Monaco, Vediamo, WIS/ASRA, EPC |
| Supported Brands | Mercedes-Benz, AMG, Maybach, Smart, Fuso, Setra |
| Supported Protocols | DoIP (ISO 13400), CAN-FD, High/Low-Speed CAN, K-Line, SAE J1939 |
| Connectivity | Wireless Wi-Fi (802.11 b/g/n/ac) + Locking USB 2.0 |
| Operating Voltage | 12V & 24V DC Auto-Sensing (8V–32V) |
| Vehicle Coverage | 2000 – 2025+ Passenger, EQ, Vans, Trucks & Buses |
|---|---|
| OS Compatibility | Windows 10 & Windows 11 (64-Bit Pro) |
| Housing Material | Rubber-Armored Industrial ABS/Aluminum |
| Status Indicators | 4 Activity LEDs (Power, Vehicle, USB, Wi-Fi) |
| Origin | Germany / China (OEM VCI C6 Architecture) |
| Warranty | 6-Month Official Otoeko Warranty |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Connect OBD2 Harness
Screw the 16-Pin OBD2 cable onto the C6 VCI unit, plug into the vehicle port, and turn ignition ON.
Link via USB or Wi-Fi
Use Wi-Fi for quick diagnostics or connect the locking USB cable for DTS Monaco coding and DoIP flashing.
Run XENTRY Quick Test
Launch XENTRY to automatically read the FIN/VIN and scan all 40–80+ installed control modules.
Adapt & Variant Code
Perform gearbox/engine adaptations in XENTRY or offline variant coding in DTS Monaco.
Technical Capabilities & Operational Advantages
Key engineering advantages for professional workshop diagnostics.
Core Workshop Requirements
- Legacy SD Connect C4 units are bulky and prone to battery/LCD failures.
- Non-DoIP C4 clones cannot communicate with newer W206/W213/W223 and MBUX modules.
- Basic J2534 PassThru cables cannot access K-Line modules or 24V trucks.
- Generic scanners do not support DTS Monaco or Vediamo.
With Mercedes-Benz XENTRY Diagnosis VCI (C6 · DoIP · Wi-Fi + USB)
- Compact 6th-Gen XENTRY VCI (C6) architecture with zero battery maintenance.
- Built-in DoIP and CAN-FD support for latest W206, W214, W223, and EQ platforms.
- Full 12V passenger/van and 24V Actros/Travego truck/bus compatibility.
- Works seamlessly with DTS Monaco and Vediamo for offline engineering coding.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Mercedes-Benz XENTRY Diagnosis VCI (C6) Main Unit
- 1 × 16-Pin OBD2 Main Cable (DoIP Enabled)
- 1 × Locking High-Speed USB PC Cable
- 1 × Heavy-Duty Carrying Case (Note: XENTRY software & laptop sold separately)
6 Months Official Otoeko Warranty
The Mercedes-Benz XENTRY Diagnosis VCI (C6 · DoIP · Wi-Fi + USB) is backed by a 6 Months official Otoeko warranty against manufacturing defects, with full technical support.
Frequently Asked Questions
Key technical questions from technicians and workshops about the Mercedes-Benz XENTRY Diagnosis VCI (C6 · DoIP · Wi-Fi + USB).
How does Mercedes C6 (XENTRY VCI) differ from SD Connect C4?
Mercedes C6 (XENTRY Diagnosis VCI) is the 6th-generation interface replacing C4. It features native DoIP and CAN-FD support, faster scanning, no internal batteries, and direct USB + Wi-Fi operation.
Does it support new W206 C-Class, W213/W214 E-Class, and W223 S-Class?
Yes, with built-in DoIP and CAN-FD hardware it connects to the latest Mercedes-Benz passenger and EQ models.
Can it perform offline coding with DTS Monaco and Vediamo?
Yes, it is fully compatible with DTS Monaco and Vediamo for variant coding, AMG menu activation, and ECU flashing.
Does it work on 24V Mercedes trucks (Actros) and buses (Travego)?
Yes, it supports 8V–32V DC systems for both 12V cars/vans and 24V heavy-duty trucks/buses.
Is XENTRY software included?
This listing includes the C6 VCI hardware and cables; pre-configured laptop kits and software packages are available separately.
What is the warranty period?
Backed by a 6-month official Otoeko hardware warranty.