MultiEcuScan • OTO0093
Fiat, Alfa Romeo, Jeep & Chrysler Multiecuscan & AlfaOBD A5 (Blue) OBD2 Adapter Cable (MS-CAN / Tipo / 500X / Renegade)
Fiat, Alfa Romeo, Jeep & Chrysler Multiecuscan & AlfaOBD A5 (Blue) OBD2 Adapter Cable (MS-CAN / Tipo / 500X / Renegade)
- OTO0093
- MultiEcuScan
Engineered for Professional Workshop Demands
The OTO0093 is built to deliver speed, accuracy, and stability in busy service bays.
True Adapter 5 (Pin 3 & 11) Routing
Connects scanner Pin 6 (CAN-H) to vehicle Pin 3 and scanner Pin 14 (CAN-L) to vehicle Pin 11 for direct FCA MS-CAN / IHS-CAN communication.
Required for Complete Proxi Alignment
Prevents incomplete Proxi Alignment procedures when enabling CarPlay, backup cameras, fog lights, or cruise control on Tipo/Egea, 500X, Renegade, and Giulia.
Access Uconnect, HVAC & Comfort Modules
Communicates with MS-CAN modules including Uconnect Radio/Nav, Climate Control (HVAC), Blind Spot Monitoring, Park Assist, and Door nodes.
Color-Coded Blue Connector
Matches the on-screen "Connect Adapter 5 (Blue)" prompt in Multiecuscan and AlfaOBD for instant identification.
ARCHITECTURE
True Adapter 5 (Pin 3 & 11) Routing
Connects scanner Pin 6 (CAN-H) to vehicle Pin 3 and scanner Pin 14 (CAN-L) to vehicle Pin 11 for direct FCA MS-CAN / IHS-CAN communication.
- Adapter Standard: Multiecuscan / AlfaOBD Adapter 5 (A5 - Blue Cable)
- Vehicle Side Plug: 16-Pin J1962 OBD2 Male (Blue Color-Coded)
- Scanner Side Socket: 16-Pin J1962 OBD2 Female Port
- Internal Pin Mapping: Pin 6 -> Pin 3 (MS-CAN High), Pin 14 -> Pin 11 (MS-CAN Low), Pins 4/5 GND, Pin 16 (+12V)
DIAGNOSTICS
Required for Complete Proxi Alignment
Prevents incomplete Proxi Alignment procedures when enabling CarPlay, backup cameras, fog lights, or cruise control on Tipo/Egea, 500X, Renegade, and Giulia.
- Conductor Material: Oxygen-Free Pure Copper (OFC)
- Cable Length: Approx. 25 cm - 30 cm Compact Length
- Outer Jacket: Oil, Heat & Flex Resistant Industrial PVC
- Operating Voltage: 12V DC Vehicle Electrical System
COMPATIBILITY
Access Uconnect, HVAC & Comfort Modules
Communicates with MS-CAN modules including Uconnect Radio/Nav, Climate Control (HVAC), Blind Spot Monitoring, Park Assist, and Door nodes.
Detailed Visual & Technical Showcase
Close-up details and application views of the OTO0093.
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Adapter Standard | Multiecuscan / AlfaOBD Adapter 5 (A5 - Blue Cable) |
|---|---|
| Vehicle Side Plug | 16-Pin J1962 OBD2 Male (Blue Color-Coded) |
| Scanner Side Socket | 16-Pin J1962 OBD2 Female Port |
| Internal Pin Mapping | Pin 6 -> Pin 3 (MS-CAN High), Pin 14 -> Pin 11 (MS-CAN Low), Pins 4/5 GND, Pin 16 (+12V) |
| Conductor Material | Oxygen-Free Pure Copper (OFC) |
|---|---|
| Cable Length | Approx. 25 cm - 30 cm Compact Length |
| Outer Jacket | Oil, Heat & Flex Resistant Industrial PVC |
| Operating Voltage | 12V DC Vehicle Electrical System |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
6 Months Otoeko Warranty Official Otoeko Warranty
The OTO0093 is backed by a 6 Months Otoeko Warranty official Otoeko warranty against manufacturing defects, with full technical support.
Frequently Asked Questions
Key technical questions from technicians and workshops about the OTO0093.
Why wasn’t the Blue A5 cable in my older 4-piece Multiecuscan set?
Older 4-piece sets only included Green (A1), Red (A2), Yellow (A3), and Purple (A4). Newer Chrysler-platform FCA models (Tipo/Egea, 500X, Renegade, Giulia) added MS-CAN on pins 3 & 11, requiring this Blue A5 adapter.
Why does Proxi Alignment ask for Adapter 5 (Blue) halfway through?
Multiecuscan writes the HS-CAN and Low-Speed CAN nodes first, then prompts you to insert Adapter 5 (Blue) so it can write the new Proxi configuration to the MS-CAN nodes (Radio, HVAC, etc.).
Is the Blue A5 cable different from the Yellow A3 cable?
Yes. Yellow A3 routes CAN to Pins 1 & 9 (Low-Speed CAN), whereas Blue A5 routes CAN to Pins 3 & 11 (Medium-Speed CAN). Both are required for modern FCA vehicles.
Does it work with AlfaOBD on Android?
Yes, it works seamlessly with Bluetooth/Wi-Fi OBDLink and ELM327 dongles using AlfaOBD.
Do 2018+ FCA vehicles also need an SGW bypass?
Yes, vehicles equipped with a factory Security Gateway (SGW) module (late 2018+) require a 12+8 SGW bypass adapter to allow write/coding commands.
Does this connect directly to a laptop?
No, this is a passive OBD2 pin-converter cable that connects between your OBD2 interface (such as ELM327 or OBDLink) and the car.