RENAULT & DACIA VCI · NEXT-GEN CAN CLIP · EDC & UCH CODING
Renault & Dacia VCI (CAN Clip) Dealer-Level Diagnostic Interface
Built for workshops servicing Renault and Dacia vehicles, this next-generation VCI connects smoothly to Renault CAN Clip to perform EDC transmission learning, UCH configurations, and Blue dCi emission resets.
- Renault CAN Clip Compatible
- EDC Gearbox Calibration
- Windows 10/11 64-Bit Ready
- 6-Month Otoeko Warranty
Engineered for Professional Workshop Demands
The Renault VCI (CAN Clip / Alliance VI Mimarisi) is built to deliver speed, accuracy, and stability in busy service bays.
Getrag EDC Dual-Clutch Gearbox Calibration
Completes clutch touch-point and shift drum calibrations on DC4 (6-speed dry) and DW5/DW6 (7/6-speed wet) EDC transmissions.
Blue dCi / dCi Engine & AdBlue/DPF Service
Programs injector IMA codes, runs DPF forced regenerations, and clears AdBlue/SCR starter inhibit countdowns.
UCH, UPC & Multiplex Network Configuration
Diagnoses and configures UCH body control, UPC power distribution, ABS/ESP, Airbag, and EPS steering modules.
64-Bit Windows 10/11 Compatibility
Modern VCI USB controller eliminates the 32-bit OS limitations and disconnects common to older silver CLIP probes.
TRANSMISSION & POWERTRAIN ADAPTATIONS
Complete Control Over EDC Gearboxes, dCi Diesel & TCe Petrol Engines
Executes critical workshop procedures through official Renault CAN Clip menus:
- DC4 and DW5/DW6 EDC clutch engagement point and shift fork calibration
- K9K (1.5 dCi), R9M (1.6 dCi), and M9T (2.3 dCi Master) injector coding and rail pressure tests
- DPF particulate regeneration, oil dilution counter reset, and AdBlue dosing tests
- 1.0 / 1.2 / 1.3 TCe electronic wastegate, throttle body, and camshaft adaptations
BODY, SAFETY & CHASSIS ELECTRONICS
UCH, ABS/ESP, Airbag, EPB & Steering Calibrations
Displays the full vehicle multiplex network topology:
- Electronic Parking Brake (EPB) maintenance mode and caliper calibration
- Electric Power Steering (DAE/EPS) angle sensor reset and module pairing
- Airbag ECU lock/unlock and crash sensor diagnostics
- TPMS tire sensor ID programming and instrument cluster service resets
COMPACT WORKSHOP VCI DESIGN
Ergonomic Form Factor for Daily Bay & Mobile Use
Streamlined hardware package:
- Detachable 16-Pin OBD2 main cable and shielded high-speed USB cable
- Bright LED indicators for power and vehicle bus activity
- Compatible with modern CAN Clip releases and Reprog offline calibration files
- Backed by a 6-month official Otoeko hardware warranty
Detailed Visual & Technical Showcase
Close-up details and application views of the Renault VCI (CAN Clip / Alliance VI Mimarisi).
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Hardware Model | Renault VCI (Next-Gen CAN Clip Interface) |
|---|---|
| Compatible Software | Renault CAN Clip (v215 – v237+) & Reprog |
| Supported Brands | Renault, Dacia, Renault Samsung |
| Vehicle Coverage | Passenger & LCV (Clio, Megane, Duster, Master, Trafic, Kangoo, etc.) |
| Supported Protocols | High-Speed CAN, Low-Speed CAN, ISO 15765, KWP2000, ISO 9141 |
| PC Interface | High-Speed USB 2.0 |
| Operating Voltage | 12V DC via OBD2 Port |
|---|---|
| OS Compatibility | Windows 10 & Windows 11 (64-Bit) |
| Housing Material | Compact Industrial ABS/Polycarbonate |
| Status Indicators | Power & Vehicle Bus Activity LEDs |
| Origin | China (Grade A+ Next-Gen VCI PCB) |
| Warranty | 6-Month Official Otoeko Warranty |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Connect OBD2 & Force Ignition
Plug the Renault VCI into the 16-Pin OBD2 port and turn ignition fully ON (APC mode on keyless vehicles).
Connect USB to Laptop
Attach the USB cable to your PC and verify the status LEDs.
Run Multiplex Network Test
Launch Renault CAN Clip to auto-read the VIN and map all installed control units.
Execute Repair & Calibration
Open the 'Repair' tab to perform EDC calibration, DPF regeneration, or injector coding.
Technical Capabilities & Operational Advantages
Key engineering advantages for professional workshop diagnostics.
Core Workshop Requirements
- Legacy silver RLT2002 CLIP probes require older 32-bit systems and suffer frequent USB disconnects.
- Generic scanners often fail mid-procedure during Renault EDC clutch calibration.
- Cannot clear Blue dCi AdBlue starter lock countdowns.
- Missing Renault-specific DF fault sub-codes and guided repair steps.
With Renault VCI (CAN Clip / Alliance VI Mimarisi)
- Next-Gen VCI chipset runs reliably on 64-bit Windows 10 and Windows 11.
- Completes DC4 and DW5/DW6 EDC dual-clutch calibrations using factory procedures.
- Displays genuine Renault DFxxx fault codes, live parameters, and AdBlue/DPF service routines.
- Full coverage across Renault and Dacia passenger and commercial models.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Renault VCI (Next-Gen CAN Clip) Main Diagnostic Unit
- 1 × 16-Pin OBD2 Vehicle Cable
- 1 × High-Speed USB PC Cable
- 1 × Protective Storage Box (Note: CAN Clip software not included, sold separately)
6 Months Official Otoeko Warranty
The Renault VCI (CAN Clip / Alliance VI Mimarisi) is backed by a 6 Months official Otoeko warranty against manufacturing defects, with full technical support.
Frequently Asked Questions
Key technical questions from technicians and workshops about the Renault VCI (CAN Clip / Alliance VI Mimarisi).
How does this Renault VCI differ from the old silver CAN Clip probe?
Older silver RLT2002 probes suffer driver issues and USB disconnects on 64-bit Windows. This next-generation VCI runs smoothly on 64-bit Windows 10/11 with modern CAN Clip versions.
Which Renault and Dacia models are supported?
Supports Clio, Megane, Fluence, Captur, Kadjar, Talisman, Scenic, Kangoo, Trafic, Master, Duster, Sandero, Logan, Lodgy, Dokker, and Jogger.
Can it calibrate EDC dual-clutch transmissions?
Yes, via CAN Clip it calibrates both 6-speed (DC4) and 7-speed (DW5) EDC transmissions.
Does it support Blue dCi AdBlue resets and DPF regeneration?
Yes, it performs SCR/AdBlue starter lock resets, DPF regeneration, and injector coding.
Is CAN Clip software included?
This listing includes the Renault VCI hardware and cables; software and laptop bundles are available separately.
What is the warranty period?
Backed by a 6-month official Otoeko hardware warranty.