TURNKEY READY SET · WORKSTATION LAPTOP + PRE-INSTALLED ACTIVE SOFTWARE
Genuine Ford Trucks Samtec HS Light II Heavy-Duty Diagnostic Interface + Pre-Configured Laptop Set
Skip hours of complex software setup; connect immediately with our pre-paired VCI and SSD Pre-Configured Business Workstation Laptop running FODP · ODP2 · ODPLite · FODP2 · Ford Trucks EDS.
- Workstation Laptop Included
- FODP · ODP2 · ODPLite · FODP Active
- Plug & Play Delivery
- 6M VCI / 3M PC Warranty
Engineered for Professional Workshop Demands
The Ford Samtec HS Light II Orijinal + Laptop Hazır Set is built to deliver speed, accuracy, and stability in busy service bays.
100% Genuine German Samtec Build Quality
Authentic OEM Samtec HS Light II hardware—not a clone—ensuring rock-solid stability during ECU parameter programming and active tests.
FODP, ODP2, FODP2 & EDS Software Ecosystem
Covers earlier Euro 4 Cargo trucks, Euro 5 1846T (Iveco Cursor engine) tractors, and modern Euro 6 Ecotorq / F-Max fleets.
Injector, Compression, AdBlue & Speed Limiter Control
Performs injector cutout and compression tests, AdBlue/SCR resets, Euro 5/6 service interval resets, and speed limiter updates.
CAN, J1939, J1708 & K/L-Line Full Protocol Support
Operates across 7V–30V DC while driving High-Speed CAN, SAE J1939, SAE J1708, and ISO 9141 (K-Line & L-Line) buses.
FORD CARGO & F-MAX DEALER CAPABILITIES
Factory Diagnostics Across Euro 4, Euro 5 & Euro 6
Core heavy-duty workshop operations on Ford Trucks tractors and construction fleets:
- Read and clear fault codes across Engine (EDC7 / EDC17), ZF Astronic / TraXon / Ecotorq transmission, EBS, Retarder, ECAS, and VCU
- Injector coding, cylinder cutout tests, and cranking compression tests
- AdBlue / SCR pump and NOx diagnostics, DPF forced regeneration, and Euro 5/6 service light reset
- Speed limiter configuration, PTO activation, and ECU parameter programming
AUTHENTIC SAMTEC ENGINEERING
Integrated with Repair Manuals & Wiring Diagrams
Dealer architecture that pairs live diagnostics with guided repair documentation:
- Integrates directly with component locations, repair instructions, and wiring diagrams inside Ford Trucks software
- 100% compatible with the dedicated connection system of Iveco Cursor-powered Ford Cargo 1846T Euro 5 trucks
- German industrial circuitry protected against short circuits and 24V alternator spikes
- Includes heavy-duty OBD-II cable and industrial USB cable (Note: Software sold separately)
ARCHITECTURE & SYSTEM COMPATIBILITY
Ford Samtec HS Light II Orijinal + Laptop Hazır Set Software, Protocol & ECU Coverage
Hardware and operating parameters engineered for uninterrupted dealer-level communication:
- 100% Genuine: Authentic German Samtec OEM dealer hardware
- 1846T & F-Max: Supports both Iveco Cursor (1846) and Ecotorq Euro 4/5/6
- Speed & SCR: Injector tests, speed limiter updates, and AdBlue service
- Bosch EDC7UC31 / EDC17CV41 Engine ECU
Detailed Visual & Technical Showcase
Close-up details and application views of the Ford Samtec HS Light II Orijinal + Laptop Hazır Set.
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Hardware Model | Genuine Ford Samtec HS Light II (100% German OEM) |
|---|---|
| Compatible Software | FODP, ODP2, ODPLite, FODP2 & EDS (Software sold separately) |
| Supported Protocols | CAN-Bus, SAE J1939, SAE J1708, ISO 9141 (K-Line & L-Line) |
| Vehicle Coverage | Ford Trucks Cargo (Euro 4 / Euro 5 1846T Cursor / Euro 6 Ecotorq) & F-Max Series |
| Operating Voltage | 7V – 30V DC (24V Heavy Commercial Vehicles) |
|---|---|
| PC Interface | High-Speed Industrial USB Cable |
| Vehicle Connector | 16-Pin Heavy-Duty OBD-II Diagnostic Cable |
| Warranty | 6-Month Otoeko Hardware Warranty |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Connect to OBD Port
Plug the Samtec HS Light II into the truck cab OBD diagnostic socket.
Attach USB & Switch Key ON
Connect the USB cable to your PC and turn the truck ignition to ON.
Launch FODP2 / ODP2 / EDS
Open FODP, ODP2, FODP2, or EDS according to the truck generation.
Test, Calibrate & Program
Execute injector/compression tests, AdBlue service, or speed limiter updates.
Technical Capabilities & Operational Advantages
Key engineering advantages for professional workshop diagnostics.
Core Workshop Requirements
- Generic truck scanners cannot access proprietary Ford Cargo 1846T and Ecotorq parameters.
- Incompatible with FODP2 and EDS software for speed limiter and ECU configuration.
- Low-cost adapters fail under 24V commercial truck voltage spikes.
- Does not link live fault codes to factory wiring diagrams.
With Ford Samtec HS Light II Orijinal + Laptop Hazır Set
- 100% Genuine Samtec HS Light II hardware grants full dealer access to all Ford Trucks ECUs.
- Works natively with FODP, ODP2, ODPLite, FODP2, and EDS software.
- 7V–30V German industrial voltage protection ensures long-term 24V reliability.
- Performs injector cutout, compression, AdBlue/DPF, and speed limiter programming.
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Pre-Configured Business Workstation Laptop (with FODP · ODP2 · ODPLite · FODP2 · Ford Trucks EDS Pre-Installed, Active & Configured)
- 1 × Original AC Power Adapter & Charging Cord
- 1 × Genuine Ford Samtec HS Light II Main Diagnostic Unit
- 1 × 16-Pin OBD-II Heavy-Duty Diagnostic Cable
- 1 × Industrial USB PC Cable
6-Month VCI & 3-Month Second-Hand PC Warranty
In the Ford Samtec HS Light II Orijinal + Laptop Hazır Set turnkey bundle, the VCI diagnostic interface is backed by a 6-month warranty against manufacturing defects, and the included second-hand laptop/tablet carries a 3-month Otoeko warranty (Laptop images are representative).
Frequently Asked Questions
Key technical questions from technicians and workshops about the Ford Samtec HS Light II Orijinal + Laptop Hazır Set.
Is this a clone or 100% Genuine Samtec?
This is the 100% Genuine German-manufactured Samtec HS Light II OEM hardware used by Ford Trucks dealerships.
Which Ford Trucks models and software are supported?
Supports Euro 4, Euro 5 (including Iveco Cursor 1846T), and Euro 6 Ecotorq Ford Cargo and F-Max trucks via FODP, ODP2, ODPLite, FODP2, and EDS.
Can it perform injector tests, AdBlue service, and speed limiter updates?
Yes, it runs injector cutout tests, compression tests, AdBlue/SCR resets, service resets, and speed limiter updates.
What is the operating voltage range?
Rated for 7V to 30V DC for full 24V heavy-duty truck protection.
Is FODP / EDS software included?
This listing includes the Genuine Samtec HS Light II hardware and cables; software and laptop bundles are available separately.
What is the warranty period?
Covered by a 6-month official Otoeko hardware warranty.