Otoeko • YAZ12
Volvo Penta VODIA 5 (v5.2.50) Marine Engines, EVC/IPS & Industrial Generator Diagnostic & Calibration Software
Volvo Penta VODIA 5 (v5.2.50) Marine Engines, EVC/IPS & Industrial Generator Diagnostic & Calibration Software
- YAZ12
- Otoeko
Engineered for Professional Workshop Demands
The YAZ12 is built to deliver speed, accuracy, and stability in busy service bays.
Complete Marine Diesel & Gasoline Coverage
Covers D1, D2, D3, D4, D6, D8, D9, D11, D12, D13, D16, KAD42/43/44/300, TAMD74/75, and 3.0L–8.1L gasoline marine engines.
EVC & IPS Propulsion System Calibration
Calibrates EVC-A through EVC-E throttle/shift levers, steering sensors, trim/tilt angles, and IPS joystick docking systems.
Industrial & Power Generation (TAD / TWD) Support
Diagnoses and configures TAD5xx–TAD16xx industrial engines used in generators, port cranes, and rock crushers.
Injector Coding & Cylinder Balancing
Writes injector trim codes and runs cylinder cut-out and compression tests across EMS2 and EVC engines.
ARCHITECTURE
Complete Marine Diesel & Gasoline Coverage
Covers D1, D2, D3, D4, D6, D8, D9, D11, D12, D13, D16, KAD42/43/44/300, TAMD74/75, and 3.0L–8.1L gasoline marine engines.
- Software / Version: Volvo Penta VODIA 5 v5.2.50
- Applications: Volvo Penta Marine Propulsion, EVC/IPS & Industrial Generators
- Interface Language: English
- Compatible Hardware: Volvo VOCOM 1 (88890300) / VOCOM 2 (88894000) + Penta 6-Pin / 8-Pin Cables
DIAGNOSTICS
EVC & IPS Propulsion System Calibration
Calibrates EVC-A through EVC-E throttle/shift levers, steering sensors, trim/tilt angles, and IPS joystick docking systems.
- Key Capabilities: Fault Diagnostics, EVC Lever Calibration, Injector Coding, Live Data & Logs
- Operating System: Windows 10 & Windows 11 (64-Bit Setup)
- Delivery Method: Digital Download + Remote Setup by OTOEKO Engineers
- Warranty: OTOEKO Installation & Operational Guarantee
COMPATIBILITY
Industrial & Power Generation (TAD / TWD) Support
Diagnoses and configures TAD5xx–TAD16xx industrial engines used in generators, port cranes, and rock crushers.
Detailed Visual & Technical Showcase
Close-up details and application views of the YAZ12.
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| Software / Version | Volvo Penta VODIA 5 v5.2.50 |
|---|---|
| Applications | Volvo Penta Marine Propulsion, EVC/IPS & Industrial Generators |
| Interface Language | English |
| Compatible Hardware | Volvo VOCOM 1 (88890300) / VOCOM 2 (88894000) + Penta 6-Pin / 8-Pin Cables |
| Key Capabilities | Fault Diagnostics, EVC Lever Calibration, Injector Coding, Live Data & Logs |
|---|---|
| Operating System | Windows 10 & Windows 11 (64-Bit Setup) |
| Delivery Method | Digital Download + Remote Setup by OTOEKO Engineers |
| Warranty | OTOEKO Installation & Operational Guarantee |
TeamViewer Remote Setup & Operating Guide
Recommended 4-step standard procedure for accurate results.
Remote Installation Scope & Official Terms
Remote installation service delivered via TeamViewer and official terms of use.
TeamViewer Remote Installation & Verification
The YAZ12 software package is installed and tested remotely on your PC via TeamViewer by our technical team (Valid for a single PC only; a vehicle is required for post-installation testing. Listed price excludes VAT and applies to cash payment).
Frequently Asked Questions
Key technical questions from technicians and workshops about the YAZ12.
Why use VODIA 5 instead of standard Volvo Truck PTT?
Standard truck PTT cannot calibrate marine EVC helm stations, IPS drives, D4/D6 EVC controllers, or older EDC1/EDC4/MEFI marine engines—those exist exclusively in VODIA 5.
Which hardware interface is required?
It works with Volvo VOCOM 1 (88890300) and VOCOM 2 (88894000) interfaces paired with Volvo Penta 6-pin or 8-pin marine adapter cables.
Can it calibrate flybridge and main helm throttle levers?
Yes, full EVC control lever and multi-station helm synchronization is built in.
Does it cover Volvo Penta industrial generators?
Yes, all TAD and TWD series genset and industrial engines are supported.
How is installation performed?
Our engineers connect remotely via AnyDesk or TeamViewer to set up the software and configure your VOCOM interface.
Is a corporate invoice provided?
Yes, backed by an official OTOEKO corporate invoice.