XHORSE PROFESSIONAL · OFFICIAL GENUINE UNIT · FREE ONLINE UPDATES · ECU / MCU / EEPROM / BMW ISN
Xhorse VVDI Prog Professional ECU, MCU, Immobilizer & EEPROM Programmer (Genuine Xhorse)
Read and write NEC, MPC, Infineon, Renesas, and MC9S12 microcontrollers, EEPROMs, and ECUs with built-in wiring diagrams, smart error checking, and lifetime free online updates.
- Genuine Xhorse
- Multi-Language UI
- Free Online Updates
- BMW ISN & VAG EDC17
Engineered for Professional Workshop Demands
The Xhorse VVDI Prog (Orijinal ECU / MCU / EEPROM Programlama Cihazı) is built to deliver speed, accuracy, and stability in busy service bays.
Full VAG EDC17 & BMW ECU Support (BMW ISN Read)
Provides comprehensive support for VAG EDC17/MED17 control units and direct ISN code extraction from BMW MEV17, MSD80, N20, N55, B38, and B48 engine ECUs.
Smart Operation Mode & Built-In Self-Test
Smart Operation Mode automatically detects and lists potential wiring or pin contact errors prior to reading, while the Self-Test function verifies the programmer's internal hardware health.
Multi-Language Software & Free Online Updates
Includes full Turkish and English software interfaces with frequent, free online firmware and database updates that add new vehicle modules automatically.
Integrated High-Resolution Connection Diagrams
Eliminates searching for external pinouts—the software contains detailed, color-coded wiring and soldering schematics for every supported ECU, BCM, cluster, and airbag module.
PROFESSIONAL PROGRAMMING CAPABILITIES
Core Operations Performed With Xhorse VVDI Prog
All-in-one bench programming for ECU cloning, immobilizer service, and electronics repair:
- ECU Read, Write & Cloning: Back up and program VAG EDC17/MED17, BMW, Mercedes, Ford, and 100+ vehicle brands; read BMW ISN codes directly
- Immobilizer, CAS/FEM & EIS Service: BMW CAS1–CAS4+ and FEM/BDC, Mercedes EIS/ESL, Audi/VW MQB/MLB/BCM2, Porsche BCM, JLR KVM, Ford PATS, and Toyota/Lexus Smart Key
- Microcontroller (MCU) Programming: Read/write encrypted and unencrypted Motorola MC9S12, MC9S08, HC05/08/11/12, NEC, MPC560x, Infineon Tricore/XC2xxx, Renesas V850/RH850, and ST10F
- EEPROM & Flash Memory Access: Fast ZIF socket reading/writing for 24Cxx, 25LCxx, 93Cxx, 95xxx, M35080, and D80D0WQ/160D0WQ odometer chips
- Dashboard, Airbag & FRM Repair: Recover corrupted BMW E8x/E9x FRM3 modules (D-Flash to EEE), read SRS airbag MCUs, and repair electronic parking brake modules
SOFTWARE ADVANTAGES & BOSCH ADAPTER SUPPORT
High-Speed USB Architecture and Expandable Hardware
Key engineering advantages of the genuine Xhorse VVDI Prog:
- High-Speed 16-Bit MCU & USB 2.0: Delivers rapid, stable read and write cycles with automatic chip identification
- Pin Contact Verification: Alerts the technician before reading if any chip leg has poor contact, preventing corrupted dumps
- Optional Bosch ECU Adapter Support: Works seamlessly with the optional VVDI Prog Bosch ECU Adapter to read Bosch ECUs without opening the cover
COMPLETE PACKAGE CONTENTS & 12-MONTH WARRANTY
Includes All Reflash Cables, Test Sockets, and Official Warranty
Genuine Xhorse accessories included in the box:
- Main Unit & Sockets: 1 × Xhorse VVDI Prog Main Unit, 1 × SOP16 ZIF Test Socket, 1 × 16-Pin Converter (SOP/SOT/SSOP), and 1 × USB Data Cable
- Dedicated Reflash Harnesses: 1 × MCU Reflash Cable, 1 × ECU Reflash Cable, and 1 × MC9S12 Reflash Cable
- 12-Month Warranty Coverage: Covered by a 12-month (1-year) warranty against manufacturing defects.
Detailed Visual & Technical Showcase
Close-up details and application views of the Xhorse VVDI Prog (Orijinal ECU / MCU / EEPROM Programlama Cihazı).
Technical Specifications & System Parameters
Complete manufacturer-verified technical data and operating ranges.
| SKU | OTO0132 |
|---|---|
| Brand & Model | Xhorse VVDI Prog ECU & MCU Programmer |
| Authenticity | Official Genuine Xhorse Product (Serial Registered) |
| Software Languages | Turkish, English & Multi-Language Support |
| Updates | Continuous Free Online Software & Firmware Updates |
| Special ECU Support | VAG EDC17, BMW ISN Read, CAS/FEM, EIS/ESL |
| Smart Functions | Smart Operation Mode, Pin Check & Self-Test |
| Supported MCUs | NEC, MPC, Infineon, Renesas, MC9S12, ST10F, Fujitsu |
|---|---|
| Supported EEPROMs | 24Cxx, 25xx, 93Cxx, 95xxx, M35080, D80/160D0WQ |
| Wiring Diagrams | Built-In High-Resolution Pinout Schematics |
| Optional Expansion | Supports VVDI Prog Bosch ECU Adapter |
| Operating System | Windows 7 / 8 / 10 / 11 (32-Bit & 64-Bit) |
| Warranty Period | 12 Months (1 Year) Against Manufacturing Defects |
| Quality Inspection | Factory-sealed genuine Xhorse complete kit |
Workshop Application & Operating Guide
Recommended 4-step standard procedure for accurate results.
Launch VVDI Prog Software
Connect the VVDI Prog unit to your Windows PC via USB, launch the software, and select the target category (EEPROM, MCU, ECU, Immobilizer, Dashboard, Airbag).
Open Built-In Connection Diagram
Select the vehicle make and module/chip, then click 'Connection Diagram' to view the high-resolution color pinout schematic.
Connect Socket or Reflash Harness
Place the EEPROM in the SOP16 ZIF socket or attach the MCU / ECU / MC9S12 Reflash cable to the module board as shown.
Read, Back Up & Write Memory
Click 'Read' to extract D-Flash, P-Flash, EEPROM, or ISN data, save a backup file, and write the new dump safely.
Technical Capabilities & Operational Advantages
Key engineering advantages for professional workshop diagnostics.
Core Workshop Requirements
- Non-updatable clones that corrupt encrypted BMW CAS4+ or Mercedes EIS MC9S12 processors
- Basic EEPROM programmers unable to read BMW ISN codes or VAG EDC17 ECUs
- Programmers lacking pin contact detection that produce corrupted dumps
- Tools without built-in wiring diagrams requiring hours of external research
With Xhorse VVDI Prog (Orijinal ECU / MCU / EEPROM Programlama Cihazı)
- Official genuine Xhorse hardware with multi-language UI and lifetime free online updates
- Full support for VAG EDC17, BMW ISN reading, CAS1–CAS4+, FEM/BDC, FRM3, and Mercedes EIS
- Smart Operation Mode and Self-Test for maximum read/write safety
- Built-in HD pinout diagrams, complete cable set, and 12-month Otoeko warranty
Package Contents — Ready for the Workshop
Complete kit inspected prior to dispatch.
- 1 × Genuine Xhorse VVDI Prog Main Unit
- 1 × SOP16 ZIF Test Socket & 1 × 16-Pin Converter (SOP/SOT/SSOP)
- 1 × MCU Reflash Cable (V3)
- 1 × ECU Reflash Cable
- 1 × MC9S12 Reflash Cable (For Encrypted Motorola/Freescale MCUs)
- 1 × Shielded USB Data Cable (12-Month Warranty)
1 Year (12-Month Manufacturer Defect Warranty) Official Otoeko Warranty
The Xhorse VVDI Prog (Orijinal ECU / MCU / EEPROM Programlama Cihazı) is backed by a 1 Year (12-Month Manufacturer Defect Warranty) official Otoeko warranty against manufacturing defects, with full technical support.
Frequently Asked Questions
Key technical questions from technicians and workshops about the Xhorse VVDI Prog (Orijinal ECU / MCU / EEPROM Programlama Cihazı).
Which chip and ECU types does VVDI Prog support?
It supports NEC, MPC, Infineon, Renesas, Motorola MC9S12, and ST10F MCUs, standard and odometer EEPROMs, VAG EDC17 ECUs, and BMW ECUs (including BMW ISN reading, CAS, FEM/BDC, and FRM).
What are Smart Operation Mode and Self-Test?
Smart Operation Mode lists potential connection errors and solutions, while Self-Test checks the programmer's internal hardware and generates a diagnostic report.
Are software updates free?
Yes. Genuine Xhorse VVDI Prog includes continuous free online software and firmware updates.
What is the Bosch ECU Adapter?
An optional Xhorse adapter that allows VVDI Prog to read supported Bosch ECUs on the bench without opening the ECU cover.
Which cables are included in the box?
The main unit, USB cable, SOP16 ZIF socket, 16-pin SOP/SOT/SSOP converter, MCU Reflash cable, ECU Reflash cable, and MC9S12 Reflash cable are all included.
What is the warranty period?
All genuine Xhorse VVDI Prog units we sell are covered by a 12-month warranty against manufacturing defects.