What does it mean?
The P0114 occurs when the PCM reads a signal in the IAT circuit which is inconsistent. The signal will often be correct periodically. This is a distinct condition from related codes P0112 and P0113. For these codes the PCM reads either a consistent high or low voltage in the IAT circuit. See the IAT in depth article (P0112) for more background on the IAT sensor.
Note: Regardless of the code and the system affected, the word “Intermittent” refers to the fact that there is a sporadic, unpredictable, or, well, intermittent fault in that system. The most likely causes of codes that relate to intermittent faults include poor connections in both live and ground circuits, as well defective switches, relays, and sensors.
Intermittent faults can be extremely difficult to trace and fix, since code readers generally do not specify in which part of the circuit the problem lays. For instance, the fault could be an intermittent interruption of the reference voltage (power supply), or, as often happens, the problem could be an intermittent break in the signal voltage to the PCM (Powertrain Control Module) due to a failing sensor, wiring issues, or defective electrical connector(s).
Note that the word “intermittent” often means different things to different applications; some systems will set a code the first time an intermittent fault occurs, while others will only do so after several failure cycles. In some cases, it may be necessary to allow the fault to worsen before an accurate and definitive repair can be made.