Skip to content

Left Rear Center Sensor Circuit Fault

Jump to the fix

Severity

High

Can I keep driving?

Avoid extended driving; visit a service soon.

First step

Measure all four tyres cold with a calibrated gauge and inflate to the placard value

  • CChassis
  • 1Manufacturer-specific
  • 7Chassis / ABS
  • 07Sequence number

What does it mean?

C1707 is a Chassis (ABS, traction control, steering) fault code. It indicates: LR Low Pressure Signal .

Symptoms

  • Tyre pressure warning lamp on
  • Message or pressure display pointing to the left rear tyre
  • Visibly soft left rear tyre, especially noticeable when loaded
  • Slight pull to one side, heavier steering feel and increased fuel consumption
  • Warning that comes on in cold weather and disappears once the tyre heats up

Likely causes

  • Under-inflation in the left rear tyre, often after a long period without a pressure check
  • Puncture or slow leak through the tread, bead seat or a corroded rim
  • Valve stem seal, grommet or core leaking at the sensor
  • Seasonal temperature drop lowering pressure past the warning threshold
  • Wrong placard pressure or threshold stored after fitting different wheels or tyres
  • Sensor reporting an inaccurate low value as it ages
  • Position learn done incorrectly so the left rear location is linked to another sensor

How to fix it

  1. Measure all four tyres cold with a calibrated gauge and inflate to the placard value
  2. Compare scan tool per-wheel pressure values against the gauge to see whether the sensor is honest
  3. Inspect the left rear tyre and rim for punctures, bead corrosion and impact damage; soap-test for leaks
  4. Replace the valve service kit if the stem seal or core is leaking
  5. Replace the sensor and program its ID if it reports a value that does not match reality
  6. Confirm the module's placard pressure and threshold settings match the fitted tyre size
  7. Perform the relearn, clear the code and verify after a road test

Codes From the Same System

All Fault Codes

Related Similar Codes

This information follows the generic OBD-II definition and does not replace a vehicle-specific diagnosis. The severity rating is rule-based; an authorised diagnostic reading is required for a definitive answer.