Skip to content

Power Window LR Motor Circuit Open

Jump to the fix

Severity

Medium

Can I keep driving?

Usually drivable, but get it diagnosed without delay.

First step

Read the stored fault and check the module's live data to see how it currently reports the right channel

  • BBody
  • 1Manufacturer-specific
  • 4Body
  • 15Sequence number

What does it mean?

B1415 is a Body (airbags, seat belts, body electronics) fault code. It indicates: HFM Right Audio Output Circuit Low .

Symptoms

  • Caller audio missing or extremely quiet from the right side of the cabin during hands free calls
  • Call sound is heard only from the left, giving an obviously one sided conversation
  • Buzzing or muffled speech instead of clear audio on that channel
  • The system may drop hands free operation and hand the call back to the phone
  • Fault logged while music playback from the head unit still sounds correct

Likely causes

  • Short to ground in the wire between the hands free module and the radio or amplifier right channel input
  • Damp or corroded module connector, common where the unit is mounted low behind interior trim
  • Harness chafed against a console bracket, seat rail or floor pan edge
  • Terminal that has backed out of the connector body and is touching the shell
  • Failing input stage in the audio unit dragging the channel down
  • Internal output driver fault inside the hands free module
  • Accessory wiring spliced into the right audio link during a previous installation

How to fix it

  1. Read the stored fault and check the module's live data to see how it currently reports the right channel
  2. Inspect the hands free module connector and its mounting area for water ingress, corrosion or a lock that is not engaged
  3. With the module unplugged, measure resistance from the right audio output pin to ground; a good circuit is not connected to ground
  4. Check the wire's continuity and insulation through to the audio unit while flexing the harness under the console and carpet
  5. Unplug the receiving audio unit to determine whether the low reading comes from the source, the wiring or the load
  6. Repair the shorted section, dry the connector and eliminate the water leak if corrosion is present
  7. Apply any available module software update, and replace the hands free module only once the harness and audio unit have both tested good

Codes From the Same System

All Fault Codes

Related Similar Codes

This information follows the generic OBD-II definition and does not replace a vehicle-specific diagnosis. The severity rating is rule-based; an authorised diagnostic reading is required for a definitive answer.